Lenovo 7Z46 매뉴얼 - 페이지 8

{카테고리_이름} Lenovo 7Z46에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 7Z46 12 페이지. Toolless friction rail v2
Lenovo 7Z46에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지)

Install Rails to Rack

Notes: The graphic shown below is the right rail.

Use the same method to install the rails to all types of racks:

• For square-hole rack, use M5 screws and cage nuts

• For round-hole rack, use M5 screws and clip nuts

• For threaded rack, use only 10-32 or 12-24 screws (depending on the rack)

Step 1. Align the rail with the rack and install the screws to secure the front side of the rail.

Step 2. Adjust the rear sliding bracket against the rack; then, install the screws to secure the rail.

Step 3. Repeat step 1-2 on the left rail.

Screws installation on the front side of the rack

Screws installation on the rear side of the rack

8 8