- ページ 20

モニター Lenovo 10QX-PAR1-WWのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Lenovo 10QX-PAR1-WW 49 ページ。

Wall Mounting (Optional)

Refer to the instructions that come with the base mounting kit. To convert your LCD display

from a desk-mounted to a wall-mounted display, do the following:

Step 1: Verify that the Power button is turned Off, then disconnect the power cord.

Step 2: Lay the LCD display face down on a towel or blanket.

Step 3: Remove the base and stand from the monitor.

Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm

x100mm distance), the type of VESA mounting screw is M4 x 10 mm.

Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting

kit.

For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg

To enjoy a better monitor performance, it is recommended that you install the monitor driver before using

the monitor.

To install the monitor driver, do one of the following:

•

If the optical drive is available, insert the CD that comes with the monitor into the optical

drive. Then, follow the instructions on the screen.

•

If the optical drive is not available, download the driver from the Lenovo Web site at

http://support.lenovo.com/docs/TIO24Gen3Touch. Then, follow the instructions in

following illustration shows that you can rotate clockwise the monitor at an angel of -5° to

the left and 90° to the right."on page 2-2.

VESA hole

4."The

2-5

Chapter 2.