- ページ 25

顕微鏡 Nikon Eclipse E600のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Nikon Eclipse E600 37 ページ。 Teaching head/multi teaching head
Nikon Eclipse E600 にも：取扱説明書 (38 ページ), 取扱説明書 (37 ページ), 取扱説明書 (21 ページ)

ページを印刷する

Assembly

WARNING

To prevent electrical shock or fire, turn off the power switch (flip it to the "

side) during assembly.

CAUTION

« + When assembling the microscope, assemble the eyepiece tube first.

+ When moving the microscope, be sure to detach the lamphouse and securely

grasp the arm from the back of the microscope with both hands.

* Do not grasp the coarse and fine focus knobs, eyepiece tube or stage, etc. when

carrying the microscope.

This could cause the part to come off, resulting in

damage to the microscope.

+ Be careful not to pinch your hands or fingers when setting up the microscope.

* Viewing will be adversely affected if any of the lenses is scratched or has fin-

gerprints on it. Handle the lenses carefully during assembly.

* This microscope is a precision optical instrument.

Handle it carefully and do

not subject it to a strong physical shock.

(The accuracy of the objectives in

particular may be adversely affected by even a weak physical shock.)

Assemble each part in sequence as numbered in the diagram.

(For details, refer to pages 25 to 29.)

Tools needed

Two hexagonal screwdrivers (provided)

When not using, place these in the tool holder in the back of the microscope.

Installation location

This product is a precision optical instrument, and using or storing it under unsuitable conditions

may damage it or may have an adverse effect on its accuracy.

The following conditions should

be kept in mind when selecting the installation location.

* Avoid installing the microscope in a brightly lit location such as a room that receives direct

sunlight, or directly under room lights.

The quality of the view through the microscope dete-

riorates if there is excessive ambient light.

¢ Install the microscope in a location that is free from dust or dirt.

* Install the microscope on a flat surface with little vibration.

* Install the microscope on a sturdy desk or table that is able to bear the weight of the instru-

ment.

* Do not install the microscope in a warm, humid location.

In such a location, condensation or

mold may form on the lenses, degrading the performance or damaging the instrument.