- ページ 20
顕微鏡 Nikon LabophotのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Nikon Labophot 28 ページ。 Y-r stand biological microscope
ページを印刷する
(4)
Objective
Use the ordinary CF objectives.
3) Microscopy
(1) Turn ON the power switch. Set the bright-
nesscontrol dial to 4.
(2)
Remove
the dust cap and place the daylight
filter.
(3) Place the specimen on the stage and focus
on specimen with 10Xobjective.
(4) Adjust
the
interpupi Ilary
distance
and
diopter. (Refer to P. 9)
(5) Swing in the top
lens of the swing-out
condenser in the optical path. (If using 4X
objective swing out the top lens.)
(6) Center the condenser. (Refer to P. 10)
(7) Rotate the polarizer until the darkest field
of
view
is obtained.
(8) Set the brightness control dial to 5 - 6.
(9) Change
over
the objective to be used and
sharpen the focus on the specimen.
(10) Adjust
the apertu re diaphragm and field
diaphragm. (Refer to P. 10 and 11)
20
(NOTE)
The following
accessories can not be used in
combination
with
LABOPHOT
(Y - R stand)
Microscope.
eTeaching
Head
and
Multi-teaching
Head
(Only
when they are combined with Ultra
Wide Eyepiece Tube "UW")
eEpi-iliuminator
"M"