Nikon Labophot 사용 설명서 - 페이지 20
{카테고리_이름} Nikon Labophot에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon Labophot 28 페이지. Y-r stand biological microscope
페이지 인쇄
(4)
Objective
Use the ordinary CF objectives.
3) Microscopy
(1) Turn ON the power switch. Set the bright-
nesscontrol dial to 4.
(2)
Remove
the dust cap and place the daylight
filter.
(3) Place the specimen on the stage and focus
on specimen with 10Xobjective.
(4) Adjust
the
interpupi Ilary
distance
and
diopter. (Refer to P. 9)
(5) Swing in the top
lens of the swing-out
condenser in the optical path. (If using 4X
objective swing out the top lens.)
(6) Center the condenser. (Refer to P. 10)
(7) Rotate the polarizer until the darkest field
of
view
is obtained.
(8) Set the brightness control dial to 5 - 6.
(9) Change
over
the objective to be used and
sharpen the focus on the specimen.
(10) Adjust
the apertu re diaphragm and field
diaphragm. (Refer to P. 10 and 11)
20
(NOTE)
The following
accessories can not be used in
combination
with
LABOPHOT
(Y - R stand)
Microscope.
eTeaching
Head
and
Multi-teaching
Head
(Only
when they are combined with Ultra
Wide Eyepiece Tube "UW")
eEpi-iliuminator
"M"