- ページ 7

計測機器 Nikon Callaway XHOTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Nikon Callaway XHOT 17 ページ。

ページを印刷する

Operational Summary

Caution-use of controls or adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure

1. Install a battery in the battery chamber. (See

"Changing

Batteries")

2. Rubber eyepiece cup

Eyeglass

wearer:

Collapse the

eyepiece

cups.

Non-eyeglass

wearers:

Do not collapse the eyepiece cups.

3. Diopter adjustment

Adjust diopter to obtain a clear image in the LCD.

First, rotate the diopter

adjustment

ring counterclockwise until it

comes

to a complete

stop.

Next, turn on the power to

activate

the

LCD

when

you look through the Laser Rangefinder. Rotate the diopter adjustment ring clockwise until the display comes into

focus.

If the diopter is not adjusted to correspond to your eyesight, you may not be able to clearly focus your subject.

Measuring

Note: Depressing

and

holding down the POWER button

causes

all

symbols

to be displayed in the LCD panel. After you remove your finger

from the POWER button, the last-used setting is displayed. (If

you

briefly press the POWER button then remove

your

finger, the LCD panel

may display the last-used

setting without

displaying all of the symbols. This is not a malfunction or other problem.)

Before measuring, be sure to confirm unit

setting.

seconds

pass

without

operation

Power

off:

LCD indications disappear.

Power turns off B seconds after the last operation.

1:.r

[Continuous measurement mode)

For continuous

measurement mode

(for 8 seconds)

IPOWEAI Depressing the POWER button

allows

you to perform continuous measurement for 8

seconds.

The Laser Rangefinder doesn't have a single measurement function

Blinks while performing measurements.

When measuring a pin at a golf course, for

example,

use the continuous measurement mode for

easy measurement. With no objects between you and the pin, the Laser Rangefinder measures

the distance to your targeted pin.

Selecting display unit (default setting is yards.)

Meter[ml

Yard[YDI

1. Confirm the internal LCD panel is on.

2. Press

and

hold the MODE button (more

than

two

seconds.)

3. When display unit has switched, release the MODE button.

4. Repeat steps 2 and 3 until your desired mode is

displayed.

5. When you have completed setting, results will be converted and displayed in the your

selected

measurement unit.

6. Distance display

The Laser Rangefinder has a First Target Priority System. When measuring overlapping subjects, this equipment displays the distance

to the closest subject.

7. Low battery indication

Flashing

indicates that the battery charge is low and battery

should

be replaced. (See

"Changing

Battery")