- ページ 2

自動車アクセサリー ARMORDILLO RS Running BoardsのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ARMORDILLO RS Running Boards 8 ページ。 2009-2018 doge ram 1500 - crew cab, 2010-2018 ram 2500/3500 - crew cab, 2018-2022 ram 1500 classic - crew cab, excl. chassis cab diesel models
ARMORDILLO RS Running Boards にも: 取付説明書 (6 ページ)

2007-2019 Chevy Silverado 2500/3500 / GMC Sierra 2500/3500 - Extended Cab/Double Cab

PARTS LIST:

1
Driver/Left RS2 Running Board
1
Passenger/Right RS2 Running Board
3
Driver/Left Mounting Brackets
2
Passenger/Right Center/Rear Mounting Brackets
1
Passenger/Right Front Upper Mounting Bracket
1
Passenger/Right Front Lower Mounting Bracket
12
10-1.5mm x 35mm Hex Bolts
24
10mm x 27mm OD x 3mm Flat Washers
Front
PROCEDURE: REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ON MODELS WITH DEF TANK,
SELECT A FLAT, LEVEL AREA FOR INSTALLATION. MAY REQUIRE CUTTING.
1. Start the installation under the Driver/Left side of the vehicle. Locate the 4 tabs along the bottom edge
of the body, (pinch weld). Mounting will use the 1st, 2nd and 4th tab locations, (Figure 1). Directly
above each tab is a top mounting location on the side of the body panel. Hold a Bracket up in place to
help determine the mounting holes to use along the body.
2. Determine the correct procedure for your model year and each Bracket location.
Bottom mounting location on the edge of the pinch weld.
Flat tab on pinch weld with factory installed weld nut:
Thread hex bolt into weld nut from the backside-down to clear paint from threads, (Figure 2).
Flat tab on pinch weld with hole:
Select (1) 8mm Clip Nut. Slide the Clip Nut over the tab with the nut facing up behind the tab,
(Figure 3). Line up threaded nut with hole in the tab.
Locate top mounting location on the back side of the rocker panel.
Models with factory installed threaded insert in rocker panel:
Thread 8mm Hex Bolt into threaded insert to clear paint as required.
Large and small hole in side of rocker panel:
2007-2018 Chevy Silverado 1500 / GMC Sierra 1500 - Extended Cab/Double Cab
Passenger/Right
Mounting Brackets
Driver/Left
Running Board
12
10mm Nylon Lock Nuts
1
8-1.25mm Bolt Plate
1
8-1.25mm x 40mm Hex Bolt
12
8-1.25mm x 25mm Hex Bolts
12
8mm Lock Washers
13
8mm x 24mm OD x 2mm Flat Washers
1
8mm Nylon Lock Washers
11
8mm Clip Nuts
PS Front
Upper & Lower
Bracket
Page 2 of 8
RS Running Boards
(3) Driver/Left
Mounting Brackets
7/31/20 (AL)