- ページ 4

自動車アクセサリー ARMORDILLO RS Running BoardsのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ARMORDILLO RS Running Boards 8 ページ。 2009-2018 doge ram 1500 - crew cab, 2010-2018 ram 2500/3500 - crew cab, 2018-2022 ram 1500 classic - crew cab, excl. chassis cab diesel models
ARMORDILLO RS Running Boards にも：取付説明書 (6 ページ)

ページを印刷する

2007-2019 Chevy Silverado 2500/3500 / GMC Sierra 2500/3500 - Extended Cab/Double Cab

a. 2017-on DEF tank models: Locate the 2nd tab bracket location along the bottom edge of the

body, (pinch weld), (Figure 11). Hold the DEF cover in place and mark the location onto the

cover, (Figures 18A & 18B). Use a sharp knife or hacksaw blade to carefully cut a slot in the

plastic cover to clear the 2nd Bracket. Remove as little plastic as possible.

12. Repeat Step 5 to attach the Passenger/Right Running Board.

13. Once the Running Board has been installed and all hardware fully tightened, reinstall the DEF tank and

cover, if equipped, as described in Step 7.

14. (OPTIONAL) If treads on the stepping platform are desired, remove the platforms from both Running

Boards and reattach them to the opposite sides, (Figure 19).

15. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

To protect your investment, Do not use any type of polish or wax that may contain abrasives that could damage the

finish. Mild soap may be used also to clean the Running Boards.

(Fig 1) Driver/Left (3) mounting locations

Factory 8mm threaded

insert in body panel

8mm Clip Nut

(Fig 3) Driver/Left Front mounting location

2007-2018 Chevy Silverado 1500 / GMC Sierra 1500 - Extended Cab/Double Cab

Driver/Left Side Installation Pictured

Front

Factory 8mm threaded

insert in body panel

8mm Weld Nut

(Fig 2) Passenger/Right Front mounting location

Page 4 of 8

RS Running Boards

Front

7/31/20 (AL)