- ページ 15

録音機器 Disaster Area Designs QconnectのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Disaster Area Designs Qconnect 16 ページ。 Multi output midi controller

ページを印刷する

eviCe

Device mode lets you scroll through all of your connected devices, change their patches /

sounds, and bypass or engage them.

It's a quick way to make changes on your pedals, and we also use it to edit the settings for

preset mode.

Hold down the right footswitch from preset mode to enter the first device mode (DevA).

If you're already in a device mode, hold the right footswitch to move to the next device mode

(DevB, DevC, etc.)

Once you are in device mode, the qCONNECT changes from controlling all of your devices at

the same time to controlling only the selected device.

A 16

....

HOLD TO

BYPASS

Tap the left or right buttons to

select the sound you want to

use on the selected device.

If you want to bypass this

device, hold the left button.

You can also use Device mode to help

you save presets on your Chase Bliss

Audio or Red Panda pedals.

Select the location of the sound you'd

like to save in the qCONNECT Device

mode.

Turn the knobs and move the DIP

switches on your pedals, and when you

get the sound you want, hold both of

the footswitches on the pedal.

Long-hold the left footswitch on

qCONNECT to send over the MIDI

message to save.

The center LED (Chase Bliss) or green

LED (Red Panda) will flash to show that

it has saved the new sound.

ode

P 01

TAP

Hold the right button to

advance to the next device

mode (Dev B.)

Repeat to edit all of your

devices.

HOLD

8 . ..

A 02

A 16

....

LONG

HOLD

P 02

Repeat to scroll through all

of your remaining devices, or

long-hold the right button

to go back to Preset mode

immediately.

HOLD

BOTH

LONG

HOLD