Disaster Area Designs Qconnect Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису Disaster Area Designs Qconnect. Disaster Area Designs Qconnect 16 сторінок. Multi output midi controller

Друкувати сторінку
d
m
eviCe
Device mode lets you scroll through all of your connected devices, change their patches /
sounds, and bypass or engage them.
It's a quick way to make changes on your pedals, and we also use it to edit the settings for
preset mode.
Hold down the right footswitch from preset mode to enter the first device mode (DevA).
If you're already in a device mode, hold the right footswitch to move to the next device mode
(DevB, DevC, etc.)
Once you are in device mode, the qCONNECT changes from controlling all of your devices at
the same time to controlling only the selected device.
A 16
....
HOLD TO
BYPASS
Tap the left or right buttons to
select the sound you want to
use on the selected device.
If you want to bypass this
device, hold the left button.
You can also use Device mode to help
you save presets on your Chase Bliss
Audio or Red Panda pedals.
Select the location of the sound you'd
like to save in the qCONNECT Device
mode.
Turn the knobs and move the DIP
switches on your pedals, and when you
get the sound you want, hold both of
the footswitches on the pedal.
Long-hold the left footswitch on
qCONNECT to send over the MIDI
message to save.
The center LED (Chase Bliss) or green
LED (Red Panda) will flash to show that
it has saved the new sound.

ode

P 01
TAP
Hold the right button to
advance to the next device
mode (Dev B.)
Repeat to edit all of your
devices.
HOLD
HOLD
8 . ..
A 02
A 16
....
LONG
HOLD
P 02
Repeat to scroll through all
of your remaining devices, or
long-hold the right button
to go back to Preset mode
immediately.
HOLD
BOTH
LONG
HOLD
13