- ページ 8
スノーブロワー Cub Cadet 221 HPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cub Cadet 221 HP 20 ページ。 Single stage snow thrower
Cub Cadet 221 HP にも： パンフレット＆スペック (2 ページ), 取扱説明書 (20 ページ), 仕様 (2 ページ)
ページを印刷する
Installing the Chute
1.
On the 221 HP model place the chute handle on the lower
chute as shown in Figure 3-4. Skip to step 2 for 221 LHP
models. Be certain that the handle is aligned in the channel
on the chute and the tabs snap into place.
2.
Remove the hex washer screws in the chute base. See
Figure 3-5.
Hex Washer
Screw
8
S
3— A
ection
SSembly
Channel
Tab
Figure 3-4
Figure 3-5
& S
-U
et
p
3.
Align the holes in the chute base with the holes in the
lower chute and secure with the previously removed hex
washer screws. See Figure 3-6.
Figure 3-6
Installing Chute Rotation Control Assembly (Model 221 LHP only)
1.
Remove the four hex washer screws from the back of the
handle (two on each side). See Figure 3-7.
Figure 3-7