Cub Cadet 221 HP 운영자 매뉴얼 - 페이지 8

{카테고리_이름} Cub Cadet 221 HP에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet 221 HP 20 페이지. Single stage snow thrower
Cub Cadet 221 HP에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 운영자 매뉴얼 (20 페이지), 사양 (2 페이지)

페이지 인쇄
Cub Cadet 221 HP 운영자 매뉴얼
Installing the Chute
1.
On the 221 HP model place the chute handle on the lower
chute as shown in Figure 3-4. Skip to step 2 for 221 LHP
models. Be certain that the handle is aligned in the channel
on the chute and the tabs snap into place.
2.
Remove the hex washer screws in the chute base. See
Figure 3-5.
Hex Washer
Screw
8
S
3— A
ection
SSembly
Channel
Tab
Figure 3-4
Figure 3-5
& S
-U
et
p
3.
Align the holes in the chute base with the holes in the
lower chute and secure with the previously removed hex
washer screws. See Figure 3-6.
Figure 3-6
Installing Chute Rotation Control Assembly (Model 221 LHP only)
1.
Remove the four hex washer screws from the back of the
handle (two on each side). See Figure 3-7.
Figure 3-7