- ページ 2

カー・ステレオ・システム Discount Car Stereo A2D-KNWのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2D-KNW 4 ページ。 Bluetooth music streaming e for select kenwood aux ready radios

ページを印刷する

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Requirements:

Kenwood aux ready radio with 13 pin cd changer port

Introduction

They are thousands of Kenwood radios out there that do not support Bluetooth

and the A2D-KNW add-on module is updates a great number or these radios to

support a music streaming connection from Smartphone, Tablet, Kindle and

more. Simply enable AUX option from within the radio menu, connect module to

the radio 13-pin CD changer port, pair audio device and enjoy the best sound

possible on the car speakers! Connecting the A2D-KNW requires disconnecting

the CD changer and/or any other Kenwood accessory that may be present.

The compatible Kenwood radio must have a menu option from which user can

enable "AUX" option. If this menu option is missing, the A2D-KNW will not work.

Installation

Remove radio from the dash to gain access to connector

Disconnect any accessory presently connected to radio 13-pin DIN

connector

Connect module 13-pin plug to radio CD changer port (See. Fig. 1)

Pairing

Pairing process varies among devices but the basic steps are the same. This

process is done upon initial install and will not have to be repeated

2. Select

3. Then select Bluetooth settings

4. Tap "

5. Wait for the Bluetooth device name to appear and select it. (See below)

Fig. 1

13-pin CD changer port

RED

Tap or splice adapter

wire to accessory wire (usually red) on

radio harness and proceed to next section.

Settings, Wireless & Networks, Bluetooth Settings

Go to

Bluetooth

and turn on.

Scan" for devices