Discount Car Stereo A2D-KNW Kurulum Kılavuzu - Sayfa 2

Araba Stereo Sistemi Discount Car Stereo A2D-KNW için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Discount Car Stereo A2D-KNW 4 sayfaları. Bluetooth music streaming e for select kenwood aux ready radios

Sayfayı Yazdır
PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
•
Requirements:
Kenwood aux ready radio with 13 pin cd changer port
Introduction
They are thousands of Kenwood radios out there that do not support Bluetooth
and the A2D-KNW add-on module is updates a great number or these radios to
support a music streaming connection from Smartphone, Tablet, Kindle and
more. Simply enable AUX option from within the radio menu, connect module to
the radio 13-pin CD changer port, pair audio device and enjoy the best sound
possible on the car speakers! Connecting the A2D-KNW requires disconnecting
the CD changer and/or any other Kenwood accessory that may be present.
The compatible Kenwood radio must have a menu option from which user can
enable "AUX" option. If this menu option is missing, the A2D-KNW will not work.
Installation
Remove radio from the dash to gain access to connector
1.
Disconnect any accessory presently connected to radio 13-pin DIN
2.
connector
Connect module 13-pin plug to radio CD changer port (See. Fig. 1)
3.
.
4.
Pairing
Pairing process varies among devices but the basic steps are the same. This
process is done upon initial install and will not have to be repeated
1.
2. Select
3. Then select Bluetooth settings
4. Tap "
5. Wait for the Bluetooth device name to appear and select it. (See below)
Fig. 1
13-pin CD changer port
RED
Tap or splice adapter
wire to accessory wire (usually red) on
radio harness and proceed to next section.
Settings, Wireless & Networks, Bluetooth Settings
Go to
Bluetooth
and turn on.
Scan" for devices
.