- ページ 5

自動車アクセサリー Discount Car Stereo A2DIY-JAG98のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2DIY-JAG98 11 ページ。 Bluetooth 1997-06 xk (x100)and 1998-03 xj (x308) with cd changer
Discount Car Stereo A2DIY-JAG98 にも：クイック・スタート Bluetooth インストール・マニュアル (11 ページ)

ページを印刷する

Installing Bluetooth Module

In our 2001 XJR test vehicle with Premium Audio, the Bluetooth module was

installed in armrest (See Fig. 10). In this area you will also find factory

phone plug (See Fig. 11) and cigar lighter, either of which can be used to

power module (see Fig. 10).

Fig. 10

Fig. 11

Connect/Tap module

Red wire to

connect to constant battery supply)

If vehicle has phone plug, use chart below to tap module accessory

wires. Always test prior to making

Factory connector/Plug

Accessory wire

10-pin Female (white)

Pin 10 (light green)

10-pin Male (yellow)

Pin 10 (white/green)

14-pin (yellow)

Pin 13 (Green)

18-pin male (yellow)

Pin 5 (Green)

12V Accessory supply

(Do not

connection.

Ground wire

Pin 6 (black)

Pin 11 (black)

2. If vehicle does not have a phone plug, use cigar lighter power lines

under console:

Tap module's

Red wire

to White/Blue= 12V ACC

Fig. 12

Note: Cigar lighter power may introduce noise into the system. This is not the result of

a faulty module but vehicles electrical system. Find a clean power/ground supply (we

recommend factory phone plug). If engine noise is still an issue, consider adding this

noise filter

or similar.

3. Connect audio module 8-pin DIN plug routed from trunk (See Fig. 4) to

Bluetooth module female connector seen in Fig. 13