- ページ 3
アダプター Discount Car Stereo A2DIY-CR12のPDF クイック・スタート・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2DIY-CR12 6 ページ。 For porsche cr-1& cr-2 radios
ページを印刷するFig. 4
Control button
6. Consider where to install control button. Keep in mind the
control button must be within drivers reach (cable is 6 ft.
long). Once you decide on location, simply remove tape
backing (See Fig. 4) and adhere to flat surface.
10. Install microphone to visor or headliner using included visor
clip (See Fig. 5).
Fig. 5
Microphone on 10 ft. cord
Fig. 5a
Microphone Visor clip
11. Route microphones down side pillar, behind dash. Connect
microphone 3.5mm jack to "MIC" input on module
Module shown with optional USB port
12. Secure adapter box and proceed to next section
OPTIONAL USB CHARGING PORT
(For charging, no audio playback)
This add on option provides up to 3 Amps charging current. Should
you decide on this option, we suggest 2 mounting schemes:
A. Flush to dash/panel requires drilling a ¾" hole in dashboard
B. Flush with Support bracket (mount USB terminal wherever
your installation demands without drilling)
Flush to Dash or Panel
Drill a ¾" hole in dash or panel using a step drill bit or
1.
equivalent (See Fig. 7)
Fig. 6
.
(drilling required)
Fig. 7
Step drill bit