- ページ 5

アダプター Discount Car Stereo A2DIY-CR12のPDF クイック・スタート・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2DIY-CR12 6 ページ。 For porsche cr-1& cr-2 radios

ページを印刷する

Pairing:

Pairing varies from Phone to Phone but the basic steps are the same.

This process is done upon initial install and will not have to be

repeated

1. Turn Ignition and Radio "ON"

Blue LED in peephole blink rapidly (pairing mode)

2. On A2DP device: go to

Bluetooth Settings

Bluetooth

3. Select

and turn on, select Bluetooth settings

4. Tap

Scan for devices

5. Wait for Bluetooth device name (DIY-AUDIO) to appear

Once paired Blue LED inside peephole will

and select it.

blink once every 3 seconds and emits a confirmation tone.

Pairing multiple devices

The A2DIY-CR12 will pair to only one device at a time. To pair a second

device, you must first un-pair current device (press/hold control button for

more than 2 seconds and listen for tone) or simply go to current device

setting and set Bluetooth to OFF.

Warning!

Voice Recognition applications (e.g. Siri, Google Play etc.) must

be enabled on device as you would in portable mode.

Settings, Wireless & Networks,

Test Operation:

1. Turn ignition and Radio "ON"

2. Enter CD Mode on Radio.

3. Launch Smartphone or tablet Audio streaming application

4. Use radio volume control button to set the playback level.

Warning!

Playlist/Track selection is *NOT* possible from the

Radio. Use Audio device built-in controls to access audio files.

5. If correct operation is confirmed go ahead and reinstall radio.

Push button Commands

Answer call

End call

Switch between AUX and Bluetooth

Pair/un-Pair Bluetooth

Redial last number called

Note: if no auxiliary device is connected, pressing the control button once pauses

audio stream

Proceed this way

Press and release button

Press/hold button for 2 seconds

Press button twice in succession