Discount Car Stereo A2DIY-CR12 Skrócona instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji dla Adapter Discount Car Stereo A2DIY-CR12. Discount Car Stereo A2DIY-CR12 6 stron. For porsche cr-1& cr-2 radios
Pairing:
Pairing varies from Phone to Phone but the basic steps are the same.
This process is done upon initial install and will not have to be
repeated
1. Turn Ignition and Radio "ON"
Blue LED in peephole blink rapidly (pairing mode)
2. On A2DP device: go to
Bluetooth Settings
Bluetooth
3. Select
and turn on, select Bluetooth settings
4. Tap
Scan for devices
5. Wait for Bluetooth device name (DIY-AUDIO) to appear
Once paired Blue LED inside peephole will
and select it.
blink once every 3 seconds and emits a confirmation tone.
Pairing multiple devices
The A2DIY-CR12 will pair to only one device at a time. To pair a second
device, you must first un-pair current device (press/hold control button for
more than 2 seconds and listen for tone) or simply go to current device
setting and set Bluetooth to OFF.
Warning!
Voice Recognition applications (e.g. Siri, Google Play etc.) must
be enabled on device as you would in portable mode.
Settings, Wireless & Networks,
.
Test Operation:
1. Turn ignition and Radio "ON"
2. Enter CD Mode on Radio.
3. Launch Smartphone or tablet Audio streaming application
4. Use radio volume control button to set the playback level.
Warning!
Playlist/Track selection is *NOT* possible from the
Radio. Use Audio device built-in controls to access audio files.
5. If correct operation is confirmed go ahead and reinstall radio.
Push button Commands
To
Answer call
End call
Switch between AUX and Bluetooth
Pair/un-Pair Bluetooth
Redial last number called
Note: if no auxiliary device is connected, pressing the control button once pauses
audio stream
Proceed this way
Press and release button
Press and release button
Press and release button
Press/hold button for 2 seconds
Press button twice in succession