- ページ 11

電話システム 3CX Nx 32のPDF クイックスタートマニュアルをオンラインで閲覧またはダウンロードできます。3CX Nx 32 15 ページ。
3CX Nx 32 にも：クイック・スタート・マニュアル (15 ページ)

After update

Once the update is complete, you will be notiﬁed that "Your device is up to date".

a. When the power source is connected, you will hear a short beep which means, the system is powered up.

b. When the system is started and ready, you will hear a long beep.

c. A long press on RST button for 2-3 seconds and release, will ensure the system is powered off. You will hear four beeps

as conﬁrmation. The system is now successfully powered off..

d. For reset - a long press on RST for maximum 8 seconds until you hear ten rapid beeps, resets the

3CX phone system & network settings and auto reboots to a fresh installation. Proceed to use the default

IP address to access the setup interface.

e. If the 12V power is disconnected or there is a sudden outage, the UPS battery residing inside is automatically

triggered & executes the "Power-off" command to shut down the system safely, avoiding any data loss or system damage.

Additional Guide

Call4tel NX32 Detector: To detect a connected NX32 device in your network, click here to download

Novelty Techpoint, Singapore 536212

ht t p : / / u pda t e . c a l l 4 t e l . c o m/ d e t e c t o r / N X32_ D E T E C T O R. z i p

+65 6340 1005