3CX Nx 32 Cihaz Hızlı Başlangıç Kılavuzu - Sayfa 11
Telefon Sistemi 3CX Nx 32 için çevrimiçi göz atın veya pdf Cihaz Hızlı Başlangıç Kılavuzu indirin. 3CX Nx 32 15 sayfaları.
Ayrıca 3CX Nx 32 için: Hızlı Başlangıç Kılavuzu (15 sayfalar)
Sayfayı Yazdır
10
After update
Once the update is complete, you will be notified that "Your device is up to date".
11
a. When the power source is connected, you will hear a short beep which means, the system is powered up.
b. When the system is started and ready, you will hear a long beep.
c. A long press on RST button for 2-3 seconds and release, will ensure the system is powered off. You will hear four beeps
as confirmation. The system is now successfully powered off..
d. For reset - a long press on RST for maximum 8 seconds until you hear ten rapid beeps, resets the
3CX phone system & network settings and auto reboots to a fresh installation. Proceed to use the default
IP address to access the setup interface.
e. If the 12V power is disconnected or there is a sudden outage, the UPS battery residing inside is automatically
triggered & executes the "Power-off" command to shut down the system safely, avoiding any data loss or system damage.
Additional Guide
Call4tel NX32 Detector: To detect a connected NX32 device in your network, click here to download
Novelty Techpoint, Singapore 536212
ht t p : / / u pda t e . c a l l 4 t e l . c o m/ d e t e c t o r / N X32_ D E T E C T O R. z i p
+65 6340 1005
www.call4tel.com