ページを印刷する3.1.3 Making an outgoing call in VOIP mode
•
Ensure that the 'VOIP' button (8) on the front of
the headset base is selected.
•
Lift the headset from the base or press the
headset's ON/OFF button (2) if you are already
wearing it and the base 'IN USE' LED (5) will
light.
•
After finishing your VOIP call, press the
ON/OFF button (2) to disconnect.
The headset LED (1) and the base
'IN USE' LED (5) will turn off.
3.2 Adjusting the ringing volume
When the headset is ringing to indicate an
incoming call, you can adjust the ring volume by
moving the rocker switch (17) at the back of the
headset.
3.3 Muting the headset microphone
To mute the headset microphone when on a call,
press the mute button (18) on the back of the
headset. While the headset is in mute mode, a short
beep will be heard on the headset every 8 seconds.
Press the mute button (18) again to release the
mute.
3.4 Headset transmitting volume setting
During a call you can adjust the transmit volume
of the headset by using the two buttons (9 and 10)
located on the back of the headset base.
3.5 Adjusting headset receive volume
Use the rocker switch (17) at the back of the headset
to adjust the receive volume on your headset. You
will hear a beep sound for each volume step up or
down.
headsetadvisor.com | 1-800-683-5715