DISCOVER D904 매뉴얼 - 페이지 10

{카테고리_이름} DISCOVER D904에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER D904 19 페이지.

3.1.3 Making an outgoing call in VOIP mode

•

Ensure that the 'VOIP' button (8) on the front of

the headset base is selected.

•

Lift the headset from the base or press the

headset's ON/OFF button (2) if you are already

wearing it and the base 'IN USE' LED (5) will

light.

•

After finishing your VOIP call, press the

ON/OFF button (2) to disconnect.

The headset LED (1) and the base

'IN USE' LED (5) will turn off.

3.2 Adjusting the ringing volume

When the headset is ringing to indicate an

incoming call, you can adjust the ring volume by

moving the rocker switch (17) at the back of the

headset.

To mute the headset microphone when on a call,

press the mute button (18) on the back of the

headset. While the headset is in mute mode, a short

beep will be heard on the headset every 8 seconds.

Press the mute button (18) again to release the

mute.

During a call you can adjust the transmit volume

of the headset by using the two buttons (9 and 10)

located on the back of the headset base.

Use the rocker switch (17) at the back of the headset

to adjust the receive volume on your headset. You

will hear a beep sound for each volume step up or

down.

headsetadvisor.com | 1-800-683-5715