DISCOVER D904 매뉴얼 - 페이지 11

{카테고리_이름} DISCOVER D904에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER D904 19 페이지.

3.6 Out of range and reconnection

You will hear a warning tone in the headset when

you walk out of range of the base. The headset will

be disconnected from the base and the call will be

automatically placed on hold. If you move back

inside the range of the base the headset will

automatically reconnect and the call will be active

again.

NOTE: If you do not move back inside the base range

within 5 minutes the call will be disconnected.

3.7 Battery – hotswap

The user can "hotswap" the headset battery while

on a call. When the battery is removed from the

headset, the base unit will put the call on hold for a

maximum of 5 minutes.

When the new battery is fitted to the headset, the

'IN USE' LED (1) will turn on and the call will be active

again.

Put the second battery in the battery charging slot

(19) on the top side of the base. The battery can be

removed by sliding the battery remove button (20)

sidewards.

The four LEDs (6) on the front of the headset base

indicate the battery level of your headset battery.

Indication

One LED flashing

One LED on

Two LEDs on

Three LEDs on

Four LEDs on

headsetadvisor.com | 1-800-683-5715

Battery level

< 20%

20%-40%

40%-60%

60%-80%

80%-100%