- ページ 9

DVR Dish Network DISH Player-DVR 522のPDF リモコン設定をオンラインで閲覧またはダウンロードできます。Dish Network DISH Player-DVR 522 17 ページ。 Dish network remote control setup guide
Dish Network DISH Player-DVR 522 にも：ユーザーマニュアル (1 ページ), はじめに (2 ページ)

ページを印刷する

222.book Page 65 Tuesday, July 25, 2006 1:30 PM

Press the UP or DOWN ARROW

repeatedly until the device turns off.

Press POUND (#).

Turn the device back on and try some

other buttons to make sure they work.

If necessary, repeat this procedure until

you've tried all the codes.

Checking the Device Codes

You can find out what device code you've set for each remote control mode (TV, VCR, and

AUX)

Press and hold the appropriate mode

button until all the other mode buttons

light up, and then let go of the button.

The mode button flashes.

Press the Pound (#) button twice.

Watch the mode light to determine your

code. The mode button flashes the

number for each digit of the device

code, with a pause between the groups

of flashes. A quick flash is for zero.

Instructions

Remote Controls

Controlling Other Components

Additional Information

As you press the UP or DOWN ARROW, the

remote tries each code in the memory to see if

it can turn off your device. When the device

turns off, you have found a code that might

work.

Note: The mode button for the device will flash

rapidly eight times when you've scanned all the

codes for that device.

The mode button flashes three times if you

have entered the code correctly. This stores the

code you found.

Try some other buttons to make sure they

work. Sometimes POWER works when other

buttons don't. If using Limited Mode, try

VOLUME or MUTE.

You may need to repeat the scan to find the

best code for your device.

Additional Information

For example, hold TV for a TV until all of the

other mode buttons light. When you let go, TV

will flash.

For example, if the code is 570, the mode

button flashes five times, pauses, flashes

seven times, pauses, and flashes once quickly.