- ページ 3
ペイントスプレー Disinfect&Fog Disinfecto Electrostatic SprayerのPDF オーナーシップ・マニュアルをオンラインで閲覧またはダウンロードできます。Disinfect&Fog Disinfecto Electrostatic Sprayer 7 ページ。
ページを印刷するDisinfecto Electrostatic Sprayer Manual
Operation
(please see Warning section prior to first-time operation - Page 5)
•
Remove the sprayer from the box
•
Remove the solution tank (bottle) by sliding the spring-loaded lock
switch (black). The bottle will slide out downwards from the
sprayer
•
Fill the solution tank with the desired amount of disinfectant and
insert, checking the fluid tube is in the tank, use the guide rails to
slide the tank back into position. The locking mechanism should
click when secure
•
You are now ready for use
How to Use
•
Once the disinfectant is in the tank and locked in position in the
sprayer, move to an open area to determine the spray distance
and output setting requirements (atomization)
•
Pull the trigger in the grip, inspect the output distance and type of
atomization
•
Determine if you wish to select the "Electrostatic" setting as well
(see black slide switch across from trigger area)
•
Recommended spray distance of 30-50 cm (12-20 inches)
•
Ensure continuous movement as you walk around areas/surfaces
you wish to disinfect to prevent over wetting
Note: For PPE recommendations, consult the disinfectant solution Safety
Data Sheets (SDS) from the disinfectant manufacturer.
Page 2