- ページ 11

3Dプリンター 3D Systems Cubify CUBEX TrioのPDF 交換マニュアルをオンラインで閲覧またはダウンロードできます。3D Systems Cubify CUBEX Trio 13 ページ。 Print jet replacement manual

ページを印刷する
3D Systems Cubify CUBEX Trio 交換マニュアル
5. Slowly raise the print pad until it lifts the new print tip in line with the others. All
three print tips should be touching the bed without putting any pressure on it.
6. Turn the CubeX printer off and unplug it from the mains power supply.
7. Using the 2.5mm hex driver, tighten the print jet holding bolt (pictured) to lock the
print jet in place.
With the print tips levelled you can now turn on the CubeX printer and set the print tip
offsets

Setting Print Tip offsets

See the CubeX user guide for instructions on how to set your print tip offsets.
11