3D Systems Cubify CUBEX Trio 교체 매뉴얼 - 페이지 11

{카테고리_이름} 3D Systems Cubify CUBEX Trio에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Systems Cubify CUBEX Trio 13 페이지. Print jet replacement manual

5. Slowly raise the print pad until it lifts the new print tip in line with the others. All

three print tips should be touching the bed without putting any pressure on it.

6. Turn the CubeX printer off and unplug it from the mains power supply.

7. Using the 2.5mm hex driver, tighten the print jet holding bolt (pictured) to lock the

print jet in place.

With the print tips levelled you can now turn on the CubeX printer and set the print tip

offsets

Setting Print Tip offsets

See the CubeX user guide for instructions on how to set your print tip offsets.