- ページ 4

3Dプリンター 3D Systems FabPro 1000のPDF セットアップをオンラインで閲覧またはダウンロードできます。3D Systems FabPro 1000 4 ページ。

FabPro 1000 Setup

Please see the FabPro 1000 User Guide, found on support.3dsystems.com/fabpro, for safety information and com-

prehensive operating instructions.

Save all foam and packing material for future use. Shipping without the original packing material may

cause damage to the printer.

17. Send .PXL File to Printer/

Click Add to Queue to send the

.pxl file to the printer.

This will generate a pop-up in 3D

Sprint. Fill out your information

to register your printer.

20. Fill Print Tray

You will see the screen above (1).

Pour material into tray until the

material reaches the mid step

that is molded into the print tray.

Always wear nitrile gloves

when handling materials and/

or printer components.

18. Begin Print Process

On printer, Press power button

on screen 1.

2 .

Hold down button on screen 2.

Screen 3 will show the name of

your print job. Hold down the

button to continue.

Whenever printer says "hold

btn," this is a 3-second hold.

Holding the button for 8 seconds

will shut down the printer.

21. Begin Print

Shut printer door. Hold down power

button to start print. You will see

the screen above (1) during printing.

When the print is done, follow the

steps in the Post-Processing section

of the

User

Guide.

19. Scan Material Bottle

When you see the screen above (1),

hold the bottle's QR code under the

QR-code scanner's targeting light.

Do not look into the scanner.