3D Systems FabPro 1000 Setup - Page 4
Browse online or download pdf Setup for 3D Printers 3D Systems FabPro 1000. 3D Systems FabPro 1000 4 pages.
![3D Systems FabPro 1000 Setup](/uploads/products/server2/7745/7745.jpg)
FabPro 1000 Setup
Please see the FabPro 1000 User Guide, found on support.3dsystems.com/fabpro, for safety information and com-
prehensive operating instructions.
Save all foam and packing material for future use. Shipping without the original packing material may
cause damage to the printer.
17. Send .PXL File to Printer/
Register Printer
Click Add to Queue to send the
1.
.pxl file to the printer.
2.
This will generate a pop-up in 3D
Sprint. Fill out your information
to register your printer.
20. Fill Print Tray
1
1.
You will see the screen above (1).
2.
Pour material into tray until the
material reaches the mid step
that is molded into the print tray.
Always wear nitrile gloves
when handling materials and/
or printer components.
18. Begin Print Process
1
2
3
On printer, Press power button
1.
on screen 1.
2 .
Hold down button on screen 2.
3.
Screen 3 will show the name of
your print job. Hold down the
button to continue.
Whenever printer says "hold
btn," this is a 3-second hold.
Holding the button for 8 seconds
will shut down the printer.
21. Begin Print
1
Shut printer door. Hold down power
button to start print. You will see
the screen above (1) during printing.
When the print is done, follow the
steps in the Post-Processing section
of the
User
Guide.
19. Scan Material Bottle
1
When you see the screen above (1),
hold the bottle's QR code under the
QR-code scanner's targeting light.
Do not look into the scanner.
Other Useful Documents
Please see
tems.com
versions of the following documents:
FabPro 1000 User Guide - See full
details regarding safety, facility
requirements, post-processing
instructions, and more for your
printer.
Safety Data Sheets and Instruc-
tions for Use - SDS and IFUs ship
with each material. They are also
available on
com/materials.
3D Sprint Online Help - Launch on-
line help by pressing F1 or clicking
the
©2018 3D Systems, Inc. All rights reserved.
http://support.3dsys-
/fabpro
for up-to-date
https://www.3dsystems.
icon while in the software.
P/N 45-D09 Rev. A