3D Systems FabPro 1000 Setup - Page 2
Browse online or download pdf Setup for 3D Printers 3D Systems FabPro 1000. 3D Systems FabPro 1000 4 pages.
Print Page
FabPro 1000 Setup
Please see the FabPro 1000 User Guide, found on support.3dsystems.com/fabpro, for safety information and com-
prehensive operating instructions.
Save all foam and packing material for future use. Shipping without the original packing material may
cause damage to the printer.
6. Plug in Power/Ethernet
Printer will turn on when power is
plugged in. You will hear the tilt tray
moving on start-up. Ethernet should be
connected to your building's network.
You may plug in either cable
first.WiFi not available for
printer.
9. Add Printer
1
2
3
4
Open 3D Sprint.
1.
Click the Printer icon (1).
2.
Click the Find Printer button
3.
(2) to find the printer on your
network. If this does not work,
enter the printer's IP address.
Click FabPro 1000 icon (3), and
4.
then click Next (4).
7. Install Print Platform
1
3
2
Lift handle (1). Slide print-platform
arms (2) along elevator guides (3)
until platform drops down. Push
handle down (4) to lock platform in
place.
Always wear nitrile gloves when
handling materials and/or
printer components.
You must clean the print
platform between uses.
10. Select Material
2
FabPro Proto GRY
1.
Click the
(1), as this will be the material
used in the test build later in this
guide.
2.
Click the
Next
button (2).
8. Download/Install 3D Sprint
1
4
3
2
3
2
1.
On a PC, go to
tems.com/fabpro
Software link.
2.
Follow the instructions to down-
load/install 3D Sprint.
3.
Follow link for activation code.
Ensure your computer is able to
run 3D Sprint - see
11. Select Print Mode
1
50 Micron
icon
1.
The
be pre-selected for you.
2.
Click the
support.3dsys-
.
Click Install
User
Guide.
1
2
option (1) should
Next
button (2).