- ページ 3

TVマウント Displays2go HVAWM3260SのPDF 使用方法をオンラインで閲覧またはダウンロードできます。Displays2go HVAWM3260S 5 ページ。

ページを印刷する

Step 2 - Assembling the Adaptor Plate (Fig.3)

Insert slider plates (x4) into the adaptor rails, then

insert the adaptor brackets into the adaptor rails.

Attach the adaptor bracket and slider plates with four

M6*12mm screws and four

using a Phillips screw driver.

Attach the adaptor bracket onto the panel using

the provided M5, M6, M8 screws.

NOTE: Determine the correct diameter of screw to use by

checking your panel's user manual, or by testing the

screws provided. Make sure not to force any of the screws

into the panel.

NOTE: If the back of your panel is flat and the mounting

holes are flush with the surface, use the shorter panel

screws. If the back of your panel is curved, protruded, or

recessed, use the longer screws. You may also need to use

spacers (J) with the longer screws.

Now slide the opposite mounting rail into position,

align it with the mounting holes, and secure using the

mounting hardware.

Step 3 - Attaching the flat panel to the

mount

By hand, insert two M8*12mm screws and

metal washers into threaded holes on the adaptor

panel as shown in Fig.4. Leave approximately 3/8"

of exposed thread.

With the help of an assistant, carefully lift the

panel and attach it to the mount head cautiously.

Tighten the screws as shown in Fig.5.

CAUTION: Two people recommended

6mm metal washers

8 mm

Washer--(I)

for lifting

Slider plate

(K)

M6*12mm

Screw--(C)

6 mm Metal

Washers--(H)

Adaptor brackets

8mm metal

M8*12mm

Screw--(F)

Fig. 4

Fig. 3

Adaptor rail

Adaptor bracket

Mounting screws

(A~E,G)

6mm metal

washers--(H)

Fig. 5

8mm metal

Washer--(I)

M8*12mm

Screw--(F)