- ページ 6
スピーカーシステム Acoustic Energy AEGO 5のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Acoustic Energy AEGO 5 8 ページ。 Powered 5.1 surround sound speaker system
ページを印刷するAEGOp5 Operation
The following pages provide information on the operation of
AEGO
5. The AEGO
5 was purposely designed to be simple to
P
P
operate with all functions available from the remote control.
AEGOp5 Operation
- LCD and LEDs
1. Press the power button to turn the AEGO
5 on,
P
press it again to turn it off.
2. When power is turned off but still connected to the mains:
a. LCD display and Speaker Configuration LEDs are off.
b. Decoder status and user configurations are stored.
c. Once the power is turned on again, AEGO
5 will resume
P
to its previous decoder status and user configurations.
3. When power is turned off and the unit unplugged from the mains:
a. LCD display and Speaker Configuration LEDs are off.
b. Decoder status and user configurations are not stored.
c. AEGO
5 will reset to factory defaults if the adaptor
P
is reconnected to the mains.
AEGOp5 Operation
- LCD Display
Auto Decode Mode (Auto detection of input type)
When AEGO
5 is turned on, it automatically detects and identifies the
P
audio signal coming from source unit.
Playing a DVD title with Dolby Digital (AC3) format,
the display shows the following information.
DOLBY DIGITAL CO
SURROUND
Playing a DVD title with DTS format, the display shows
the following information.
DTS COAXIAL
SURROUND
Playing DVD, CD, LD, VCR and games consoles connected to the
analog inputs (LINE, AUX1 and AUX2), the display shows
the following information.
PCM LINEIN
STEREO
AEGOp5 Operation - Mode
Selection
Surround Processing Modes:
The versatile AEGO
5 surround sound processor is capable of
P
processing both the digital or analog audio signals from many
different types of audio source. With the equipment connected
correctly, AEGO
5 automatically detects the type of digital signal
P
present at the digital input.
AEGOp5 Operation
- Input Selection
Input Selection
The AEGO
5 can be connected to up
P
to 5 audio sources. Select the input
input
source you want by repeatedly
mute
pressing the INPUT Button on the
balance
delay
remote control until the desired
field
EQ on/off
source is selected.
preset 1
preset 2
save1
preset 4
BassManager
SL/SR
VOL
DRC
In the Digital Mode (Dolby Digital / DTS), you can manually select the
audio input source either in coaxial or optical form depending on the
input type.
If "COAXIAL" is selected, the display shows the following information:
DOLBY DIGITAL CO
SURROUND
If "Optical" is selected, display of AEGO
5 shows
P
the following information:
DOLBY DIGITAL OP
SURROUND
In the PCM mode, you can switch between 3 audio input sources
such as CD Player, VCR, game consoles etc. (See page 8 or page 9
for reference). The display shows the following information:
PCM
LINEIN
STEREO
PCM
AUX1
STEREO
PCM
AUX2
STEREO
10
AEGOP5 Operation
- Test Mode
Test Mode
After connecting up to your source
and speakers, you can press the
power
TEST button on the remote to test the
test
system. You can also use the test
prologic
mode to test the location of the
EQ setup
speakers. When the TEST button is
pressed, white noise is generated
preset 3
through all satellite speakers in an
load
order of Front Left, Centre, Front
Cen
Right, Rear Left, and Rear Right
channels for 2 seconds each. When
SW
D Time
completed, the AEGO
5 returns to
P
Auto Decode mode.
When test mode is running, the display shows information in a
sequence as below:
DOLBY DIGITAL CO
TEST
L
DOLBY DIGITAL CO
TEST
C
DOLBY DIGITAL CO
TEST
R
DOLBY DIGITAL CO
TEST
SL
DOLBY DIGITAL CO
TEST
SR
AEGOp5 Operation
- Mute Mode
Mute Mode
Pressing MUTE Button on the remote
control will mute all signal outputs
(including the multipin and 6 RCA
connectors.)
To disable the mute function,
press MUTE Button again.
When MUTE Button is pressed,
the display shows the following information:
DOLBY DIGITAL CO
SURROUND
MUTE
AEGOp5 Operation
AEGOp5 Operation
- Master Volume Control
Volume Setting
To increase or decrease the master
volume of your AEGO
5, simply press
P
input
power
VOL + or VOL - on the remote control.
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
Example:
save1
preset 4
load
Volume being decreased
BassManager
Cen
by 3 decibels.
SL/SR
SW
DOLBY DIGITAL CO
VOL
D Time
VOLUME
-03DB
DRC
AEGOp5 Operation
- Balance Setting
Balance Button
You can set the volume setting of each
individual channel.
To select a channel, press BALANCE
button on the remote control
repeatedly until the desired channel is
reached.
Adjust volume on selected channel by
pressing VOL + or VOL - on the remote
control.
Example:
Press the BALANCE button once to display
the current balance volume for
channel L (Left).
DOLBY DIGITAL CO
BALANCE
L
Press the BALANCE button again to select
the next channel.
input
power
DOLBY DIGITAL CO
mute
test
BALANCE
R
balance
delay
prologic
Press VOL + or VOL - will increase or
field
EQ on/off
EQ setup
decrease the balance volume for selected channel.
preset 1
preset 2
preset 3
DOLBY DIGITAL CO
save1
preset 4
load
BALANCE
R
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
11
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset
0DB
0DB
+0DB