ページを印刷する:
CG
Glider should be in fly condition.
Do not glue the boom with fuselage till you check the balance of the model according to
weight "gm" of electronics you will use.
Steps:
1- Glue the Rudder Elevator with Boom.
2- Start with boom 700mm.
3- Insert the boom in fuselage.
4- Put the gilder on CG balance tool, if tail heavy, then shorten the boom by 100 "mm"
and check again, if tail still heavy, shorten boom by 50mm and check again. The
boom should be not less than 500mm
Boom
CG 75mm
8