- ページ 7

コントロールパネル CAME 9T90ENのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。CAME 9T90EN 12 ページ。 Control panel for 230 v - 400 v gearmotors

Safety devices

C1 = Contact (N.C.) for reopening during closing.

Input for safety devices such as photocells, sensitive edges

and other devices compliant with the EN 12978 standard.

While the operator is closing, the opening of the contact

causes the reversal of the direction of movement until

completely open.

If C1 is not used, set dip switch 7 to ON.

CX with dip switch 8 and dip switch 9 OFF = Contact (N.C.)

for reclosing during opening.

Input for safety devices such as photocells, sensitive edges

and other devices compliant with the EN 12978 standard.

While the operator is opening, the closing of the contact

causes the reversal of the direction of movement until

completely closed.

CX with dip switch 8 OFF and dip switch 9 ON = Contact

(N.C.) for partial stop.

Input for safety devices such as photocells, sensitive edges

and other devices compliant with the EN 12978 standard.

Stops the operator, if it is moving, and then sets automatic

closing.

If CX is not used, set dip switch 8 to ON.

Photocell safety connection

With each opening or closing command, the panel checks that the photocells work. Any

anomaly inhibits any command.

Set dip switch 13 to ON.

DELTA

DIR / DELTA-S

DIR / DELTA S

Photocells

DELTA