- ページ 8

コントロールパネル CAME 9T90ENのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。CAME 9T90EN 12 ページ。 Control panel for 230 v - 400 v gearmotors

7 Selecting features

1 ON

Automatic closing feature activated; (1OFF - deactivated)

2 ON

Open-stop-close-stop with button (2-7) and transmitter (AF card fitted) feature activated

2 OFF

Open-closewith (2-7) button and radio transmitter (AF card fitted) feature activated

3 ON

Open onlywith transmitter (AF card fitted) feature activated; (3 OFF - deactivated)

4 ON

Feature maintained action activated; (4OFF - deactivated)

5 ON

Pre flashing activated during opening and closing; (5 OFF - deactivated)

6 ON

Obstacle detection feature activated; (6 OFF - deactivated)

7 OFF

Reopen while closing (connect safety device on terminals 2-C1) feature activated; (7 ON - deactivated)

8 OFF / 9 OFF -

Reclose while opening (connect safety device on terminals 2-CX) feature terminals

8 OFF / 9 ON

Partial stop(connect the safety device on terminals 2-CX) feature activated; (if the devices on 2-CX are unused,

set DIP switch 8 to ON)

10 OFF

Total stop(connect buttons on 1-2) feature activated; (10 ON - deactivated)

Unused, keep DIP switch on OFF

12 ON

Partial opening (automatic closing is set to 8") feature activated

12 OFF

Partial opening feature (automatic closing is adjustable with the trimmer, if inserted) activated

13 ON

Safety test to check photocell efficiency feature activated; (13 OFF - deactivated)

Unused, keep DIP switch on OFF

16 ON

Feature courtesy lamp activated; (16 OFF - deactivated)

17 ON

Feature Cycle lamp activated ; (17 OFF - deactivated)

18 ON

Activate closing brake feature. Use only with the CBX and CBXT operators

disconnected

8 Settings

Trimmer T.C.A.

PART. OPEN TRIMMER

Adjusting automatic closing time from a minimum of 1 second to a maximum of 120 seconds.

Adjusting partial opening from a minimum of 1 seconds to a maximum of 14 seconds.

+T.C.A-

+AP.PARZ.-