- ページ 6

3Dプリンター 3DGence DOUBLE P255のPDF メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。3DGence DOUBLE P255 19 ページ。

5. In the printer's menu, choose Menu → Advanced → Heatbed Scan. At this point, the process of heatbed scanning

starts.

6. Wait until the scanning is completed – it will take about 20 minutes. After completed scanning, "HEATBED SCAN

COMPLETED" message appears on the display. The printer's heatbed has been successfully calibrated and the printer

is ready for further work.

Fig. 37 Manual adjustment of the distance between the heatbed and T0 nozzle tip

4. PRECISE AXES CALIBRATION

Recommended frequency:

each time the material type is changed to a different one.

3DGence DOUBLE P255 printer, like all 3DGence printers, is equipped with a unique system for precise dimensional

correction of the printed model. The printer is factory calibrated for Verbatim PLA material with the accuracy of 0.1

mm. During printing with the use of materials having various material shrinkage levels, the dimensional correction

may be necessary. In the case of most printers, such a correction can be very troublesome or even impossible.

Thanks to the innovative system, 3DGence DOUBLE P255 printer allows you to make a precise dimensional

correction in a simple and quick way. With just one calibration printout and simple measurements, this system

makes it possible to achieve the accuracy of 0.02 mm.

ATTENTION: each material from which the filament is made has its own unique thermal shrinkage. To ensure the

maximum precision of results, this calibration should be performed for the material from which the printout is to be

made.

To begin the precise calibration of the XY axes, the special printout has to be made (fig. 58).

Dimmension_Calibration.stl model is available at www.3dgence/support in the Your file tab (the tab is available after

creating an account and registering the device). The model should be prepared for printing in 3DGence Slicer

software for selected materials. The printout will take about 45 minutes.

3DGence DOUBLE P255 - maintenance activities | version 07.2021