ページを印刷する21. Slide the cowl into position and use your spinner to assure proper
alignment. When satisfied drill 4 holes with a 1/16" drill bit through the cowl
and into the mounting tabs. Secure the cowl with 4 of the provided wood
screws.
23. Place a strip of Velcro onto the battery tray and onto your battery and use
a Velcro strap around the battery and tray to prevent the battery from being
ejected during high G maneuvers. Install your receiver and plug in all of your
servo leads and the lead from the ESC. Power up the system (with the
propeller removed) and make sure all controls are functioning properly and
the motor is turning in the proper direction.
24. Insert the carbon fiber wing tube into the sleeve in the fuselage and slide
the wings onto the tube. Secure with the provided aluminum wing bolts
inserted through the fuselage sides and into the blind nut in the wing root.
14