3DHS SLICK 580 조립 설명서 - 페이지 14

{카테고리_이름} 3DHS SLICK 580에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHS SLICK 580 16 페이지.

21. Slide the cowl into position and use your spinner to assure proper

alignment. When satisfied drill 4 holes with a 1/16" drill bit through the cowl

and into the mounting tabs. Secure the cowl with 4 of the provided wood

screws.

23. Place a strip of Velcro onto the battery tray and onto your battery and use

a Velcro strap around the battery and tray to prevent the battery from being

ejected during high G maneuvers. Install your receiver and plug in all of your

servo leads and the lead from the ESC. Power up the system (with the

propeller removed) and make sure all controls are functioning properly and

the motor is turning in the proper direction.

24. Insert the carbon fiber wing tube into the sleeve in the fuselage and slide

the wings onto the tube. Secure with the provided aluminum wing bolts

inserted through the fuselage sides and into the blind nut in the wing root.