3DHS SLICK 580 조립 설명서 - 페이지 15

{카테고리_이름} 3DHS SLICK 580에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHS SLICK 580 16 페이지.

25. If using the included Side Force Generators now is the time to mount

them. Each SFG mounts using 2 wood screws.

Set-up and flying tips

The CG for the Slick 580 is on the wing tube. There is plenty of room on the

battery tray to move your battery to achieve this CG location. Depending on

your flying style you can adjust the position of the battery to alter the CG to

accommodate your preferences. For this type of aircraft where I am going to

predominantly fly aggressive 3D I typically set the airplane up with a neutral

CG, meaning that when the aircraft is flown inverted straight and level it

requires no down elevator to maintain altitude. If your flying style leans more

toward precision aerobatics then I recommend setting your CG using the 45

degree line test. Fly the aircraft from left to right or right to left, whichever

direction you are more comfortable with at 3/4 to full throttle. Pull the

aircraft to a 45 degree up line and establish this line and immediately roll the

aircraft inverted. Establish this line and let go of the elevator stick. Ideally

the aircraft will continue to track on that 45 degree line for several hundred

feet before slowly starting to level off. Adjust the position of your battery to

achieve this flight condition. Once satisfied with the location of your CG

scribe a mark on the battery tray so that you can position the battery in the

same location each flight and achieve the same feel and flight characteristics

each flight.

I also highly recommend taking the time to properly set up your rates and

exponential settings. Setting up low rates for precision maneuvers and high