- ページ 6

リモコン Aeritech 3DQ-S1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeritech 3DQ-S1 7 ページ。 Flight control system for multi-rotor aircraft

User Manual

Operation In Flying

1.1

Please confirm that your remote control is opened and aircraft is locked before power the aircraft.

Or aircraft will be alerted(Red flash).

Check control direction and motor direction.Wait for Green flash and you can unlock the aircraft.

Afer unlock,LED change into yellow,indicate that motor is accelerating.Please don't move throttle

stick during this process. You can take off after LED change into White flash.

After aircraft descend to the ground,lock the aircraft,motor slow down until stop.LED change into

Green flash.

You can switch flightmode during the flight.Recommends that keep your vehicle stable and it is

located in safe altitude during switching flightmode. In 3D Mode,if your aircraft lose control during

the flight, you can switch into Attitude Mode.Attitude Mode helps you stabilize the vehicle.

AltitudeHold Mode is easy to control, you can take off directly in this Mode.

※ Don't move it after power the vehicle,until Green falsh.

Aircraft can maintain attitude stabilization by itself in this Mode.

2.2 3D Mode1

You can operate aircraft flexibly in this Mode,rolls,inverted flight and so on.

This requires that you have a wealth of flight experience.

2.3 3D Mode2

This Mode's curve is Smoother than 3D Mode1,it is suitable for practing your 3D flying skills.

Aircraft can maintain attitude and altitude by itself in this Mode, When throttle stick in the middle

position, the aircraft will remain in current height.Move stick up,vehicle rise up.Move stick down,

vehicle drop to the ground.

page 4