Aeritech 3DQ-S1 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування Aeritech 3DQ-S1. Aeritech 3DQ-S1 7 сторінок. Flight control system for multi-rotor aircraft

User Manual

Operation In Flying

1 Operation Process

1.1

Power the System

Please confirm that your remote control is opened and aircraft is locked before power the aircraft.
Or aircraft will be alerted(Red flash).

1.2 Aircraft Unlock

Check control direction and motor direction.Wait for Green flash and you can unlock the aircraft.
Afer unlock,LED change into yellow,indicate that motor is accelerating.Please don't move throttle
stick during this process. You can take off after LED change into White flash.

1.3 Aircraft Lock

After aircraft descend to the ground,lock the aircraft,motor slow down until stop.LED change into
Green flash.

1.4 Change Flight Mode

You can switch flightmode during the flight.Recommends that keep your vehicle stable and it is
located in safe altitude during switching flightmode. In 3D Mode,if your aircraft lose control during
the flight, you can switch into Attitude Mode.Attitude Mode helps you stabilize the vehicle.
AltitudeHold Mode is easy to control, you can take off directly in this Mode.
※ Don't move it after power the vehicle,until Green falsh.

2 Flight Mode

2.1 Attitude Mode

Aircraft can maintain attitude stabilization by itself in this Mode.
2.2 3D Mode1
You can operate aircraft flexibly in this Mode,rolls,inverted flight and so on.
This requires that you have a wealth of flight experience.
2.3 3D Mode2
This Mode's curve is Smoother than 3D Mode1,it is suitable for practing your 3D flying skills.

2.4 AltitudeHold Mode

Aircraft can maintain attitude and altitude by itself in this Mode, When throttle stick in the middle
position, the aircraft will remain in current height.Move stick up,vehicle rise up.Move stick down,
vehicle drop to the ground.
page 4