- ページ 12

音楽ミキサー Alto AMX-120のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alto AMX-120 20 ページ。 12-channel mixing console
Alto AMX-120 にも：サービスマニュアル (20 ページ)

-. PHONES/CTRL ROOM Control

This control sets the amount of signal sent to the control room and headphone.

4.4 CTRL ROOM OUTPUT Connectors

These 1/4" sockets are used to send the control room signal to

the studio monitor speakers or a second set of PA.

-. TAPE IN

Use the tape input if you wish to listen to your mix from a taper

recorder or DAT. You can assign the signal coming from the taper

recorder either to a pair of studio monitor using the control room

assignment on the front panel or you can also send the signal

directly to the main mix.

-. TAPE OUT

These RCA jacks will route the main mix into a tape recorder.

4.6 AUX SENDS Connector

These 1/4" sockets are used to send out the signal from the AUX

bus to external devices such effects.

This socket will send out the mix signal to a pair of headphones.

The stereo output is supplied with 1/4" TRS sockets, which is used

to send the audio signal to an amplifier.

Through the main mix level control, you can adjust the output level

from -

to +15dB.

CTRL ROOM OUTPUT

2-TRACK IN/OUT

TAPE IN

TAPE OUT

AUX SENDS

MAIN MIX OUTPUT

PHONES

LEFT

RIGHT