Alto AMX-120 사용자 설명서 - 페이지 12

{카테고리_이름} Alto AMX-120에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto AMX-120 20 페이지. 12-channel mixing console
Alto AMX-120에 대해서도 마찬가지입니다: 서비스 매뉴얼 (20 페이지)

페이지 인쇄

-. PHONES/CTRL ROOM Control

This control sets the amount of signal sent to the control room and headphone.

4.4 CTRL ROOM OUTPUT Connectors

These 1/4" sockets are used to send the control room signal to

the studio monitor speakers or a second set of PA.

4.5 2TK IN/OUT Connectors

-. TAPE IN

Use the tape input if you wish to listen to your mix from a taper

recorder or DAT. You can assign the signal coming from the taper

recorder either to a pair of studio monitor using the control room

assignment on the front panel or you can also send the signal

directly to the main mix.

-. TAPE OUT

These RCA jacks will route the main mix into a tape recorder.

4.6 AUX SENDS Connector

These 1/4" sockets are used to send out the signal from the AUX

bus to external devices such effects.

4.7 PHONES

This socket will send out the mix signal to a pair of headphones.

4.8 MAIN MIX OUTPUT Connectors

The stereo output is supplied with 1/4" TRS sockets, which is used

to send the audio signal to an amplifier.

Through the main mix level control, you can adjust the output level

from -

to +15dB.

CTRL ROOM OUTPUT

2-TRACK IN/OUT

TAPE IN

TAPE OUT

AUX SENDS

MAIN MIX OUTPUT

PHONES

LEFT

RIGHT