- ページ 10

高圧洗浄機 Alto 30HA STANDARD I/MASTER IのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alto 30HA STANDARD I/MASTER I 19 ページ。 Alto-shaam inc. pressure washer user manual
Alto 30HA STANDARD I/MASTER I にも：オーナーズマニュアル (19 ページ)

ページを印刷する

Anti-incrustation - ALTO No Scale

To avoid incrustation of the piping of the boiler and thus ensure optimum operation, an anti-incrustant -

"ALTO No Scale" should be added, which is available from your ALTO distributor. Fill the anti-incrustant

through the socket (13) and it will automatically be added to the water in a balanced dosage. Any lack of

"ALTO No Scale" will appear from the level indicator (14).

3.2 Starting-up procedure

Turn on the water and turn control knob (16) to position - I -. In this position the machine is ready for cold

water operation.

3.3 Operation

Activate the high pressure washer by releasing the trigger of the spray handle (7). When starting up the

machine the pressure may be unsteady because of air in the pump system. After a short time the air has

escaped from the system and the pressure will become steady. If required let the machine operate without

spray lance until all air has escaped from the water inlet hose and the pump.

When the cleaner is not in use, secure the spray handle by turning the locking device (8) into pos. 0.

NOTE: The machine features an automatic start/stop function. When the spray handle is released, the

machine will automatically stop. The machine can be restarted just by activating

Operating instructions

Light indicator: insufficient "No Scale"

Dark indicator: sufficient "No Scale"

Only use "ALTO No Scale".

Turn control knob to position - I -.

Always hold the spray lance with both

hands!

Always lock the spray handle when the

cleaner is not in operation.

the spray handle.