- ページ 11

高圧洗浄機 Alto 30HA STANDARD I/MASTER IのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alto 30HA STANDARD I/MASTER I 19 ページ。 Alto-shaam inc. pressure washer user manual
Alto 30HA STANDARD I/MASTER I にも：オーナーズマニュアル (19 ページ)

ページを印刷する

3.4 Temperature control

Choose the required temperature by means of the control knob (16).

If the machine is put away immediately after hot water or steam operation, it should be cooled off at first by

"cold water operation" until the temperature is below 50°C. The cooling period from 80°C to 50°C is approx.

2 min. by cold water operation.

IMPORTANT (only 30HA MASTER): Adjustment at temperatures above 80°C should be made with re-

leased spray handle.

When choosing temperatures above 80°C (steam operation) the water volume is automatically reduced.

Then full water volume by cold water and hot water operation respectively cannot be obtained until the

temperature of the outlet water has fallen below 80°C. Upon that release the spray handle to have full

water volume again. The cooling period, from max. temperature (150°C) to full water volume is approxi-

mately 1 minute.

3.5 Spray lance, pressure regulation, how to use detergents

The spray lance features 2 nozzles, a high pressure nozzle and a low pressure nozzle. When the pressure

reducing valve (1) is completely closed (turned clockwise - B), only the high pressure nozzle is used - high

pressure mode. When the pressure reducing valve is quite open (turned counter clockwise - A) both spray

lances are used - low pressure mode / possibility of adding detergents. The pressure may be regulated

between these positions.

Direction of rotation of the motor

The direction of rotation of the motor should be correct in order to ensure air

supply for the boiler. If the direction of rotation is wrong (no airflow from the

chimney and thus black smoke from the boiler by hot water operation),

please refer to section »7.0 Troubleshooting and correction - phase se-

quence«.

Operating instructions

Cold water mode

Hot water mode

40 - 80°C

Steam mode

Turn pressure reducing valve:

Clockwise (B): high pressure

Counter clockwise (A): low pressure /

addition of detergents

0 - 40°C

150°C