ページを印刷する
One - Button Function
When the machine is switched off using the main switch, the current switch
states of the individual functions are stored and will be available once again
when the machine is switched on again.
When switching on again:
• Switch the machine on. To do this, hold down
the ON/OFF button (main switch) for 3 seconds.
• Cleaning solution:
Always ON (preselected)
• Volume regulation:
1
2
3
Setting as when switching off the machine.
• Suction unit:
Setting as when switching off the machine.
• Pull the operating lever.
By doing this the tool is activated.
Battery indicator
• The battery indicator shows that the machine is
ready for operation
(in case of malfunction, see page 50).
Low discharge protection:
• LED blinks red:
2 minutes to conclude the work before the machine switches off
automatically.
• LED permanently red:
Requires a complete charging cycle.
Working with the flexible central steel pillar
• Pull on the adjusting lever (1) and apply the
adjusting lever lock (2).
1
With this lock, the central steel pillar (3) can be
moved up and down freely.
The lock is released by pulling on the adjusting
2
lever again.
3
Working with the wiper
• Pull on the action lever to lower the wiper.
The wiper is intended above all for cleaning
under tables and benches. In this way, the
residual water can be wiped away by pulling the
machine back, and will be sucked up again
when the machine moves forwards.
Cleaning method
Direct method:
Scrubbing and vacuuming in one pass.
Indirect working method:
Apply the cleaning solution (scrubbing only) and then scrub and vacuum. The
squeegee must be removed for this method.
The cleaning methods are described in detail in the "Method Card". You can
obtain this from your TASKI partner.
Under certain circumstances, the driving of the machine can be
impaired by a special combination of surface/soiling and cleaning
product.
Refilling the solution tank
Caution:
Do not clean without solution, as it could cause floor damage.
When the tools are no longer sufficiently supplied with the solution, the tank
containing the solution is empty.
• Stop cleaning.
• Drain the recovery tank, see page 48.
• Refill the solution tank, see page 46.
Transport over stairs
We would recommend that any transportation of the machine
over steps should always be carried out by two persons.
• Release the operation levers.
• Switch the machine off.
• Unplug the battery disconnection socket.
• Empty the recovery and solution tanks.
Caution:
Due to the weight of the machine, there are risks involved in such
transportation!
Slipping can result in damage to the machine and injuries to
persons.
• When lifting, one person should hold the
machine at the recessed grip by the squeegee,
and the second person at the machine handle.
47