diversey CO350.5X Manual - Page 7

Browse online or download pdf Manual for Cleaning Equipment diversey CO350.5X. diversey CO350.5X 11 pages.

Print Page

One - Button Function

When the machine is switched off using the main switch, the current switch

states of the individual functions are stored and will be available once again

when the machine is switched on again.

When switching on again:

• Switch the machine on. To do this, hold down

the ON/OFF button (main switch) for 3 seconds.

• Cleaning solution:

Always ON (preselected)

• Volume regulation:

Setting as when switching off the machine.

• Suction unit:

Setting as when switching off the machine.

• Pull the operating lever.

By doing this the tool is activated.

Battery indicator

• The battery indicator shows that the machine is

ready for operation

(in case of malfunction, see page 50).

Low discharge protection:

• LED blinks red:

2 minutes to conclude the work before the machine switches off

automatically.

• LED permanently red:

Requires a complete charging cycle.

Working with the flexible central steel pillar

• Pull on the adjusting lever (1) and apply the

adjusting lever lock (2).

With this lock, the central steel pillar (3) can be

moved up and down freely.

The lock is released by pulling on the adjusting

lever again.

Working with the wiper

• Pull on the action lever to lower the wiper.

The wiper is intended above all for cleaning

under tables and benches. In this way, the

residual water can be wiped away by pulling the

machine back, and will be sucked up again

when the machine moves forwards.

Cleaning method

Direct method:

Scrubbing and vacuuming in one pass.

Indirect working method:

Apply the cleaning solution (scrubbing only) and then scrub and vacuum. The

squeegee must be removed for this method.

The cleaning methods are described in detail in the "Method Card". You can

obtain this from your TASKI partner.

Under certain circumstances, the driving of the machine can be

impaired by a special combination of surface/soiling and cleaning

product.

Refilling the solution tank

Caution:

Do not clean without solution, as it could cause floor damage.

When the tools are no longer sufficiently supplied with the solution, the tank

containing the solution is empty.

• Stop cleaning.

• Drain the recovery tank, see page 48.

• Refill the solution tank, see page 46.

Transport over stairs

We would recommend that any transportation of the machine

over steps should always be carried out by two persons.

• Release the operation levers.

• Switch the machine off.

• Unplug the battery disconnection socket.

• Empty the recovery and solution tanks.

Caution:

Due to the weight of the machine, there are risks involved in such

transportation!

Slipping can result in damage to the machine and injuries to

persons.

• When lifting, one person should hold the

machine at the recessed grip by the squeegee,

and the second person at the machine handle.