- ページ 8

クロスオーバー Alto AltoDrive2.3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alto AltoDrive2.3 20 ページ。 Crossover digitale 2 way stereo digital x over
Alto AltoDrive2.3 にも：ユーザーマニュアル (19 ページ)

ページを印刷する

1. Password

Using Left and Right keys the user can move into the string, with the dial the blinking character can be edited, Enter

confirms the choice and Esc cancels operation allowing to maintain the old preset name. Upon confirmation the new

preset name will be shown in the lower left corner of the window and in the name field.

To get back to the main menu, select 1/1 and press the Esc key.

c. MIDI Setup

This function allows a simple MIDI configuration:

with the Up/Down key it's possible to select the MIDI channel and/or the output enable; selection is highlighted

printing the item in reverse color.

With the dial it is possible to change the value of the parameter, which will be operating immediately (no confirmation

needed). To get back to the main menu, select 1/1 and press the Esc key. These two parameters are system settings,

ie. They don't belong to a particular preset.

d. VU-Meter

This page shows 4 output volumes and activity of the 4 output limiters. (see)

e. Password

With this function the user can decide if the device has to be protected from unauthorized tampering:

Name:

Num:

CHANNEL

OUT EN.

CHANNEL

OUT EN.

OFF

EMPTY

OFF

CHANNEL

OUT EN.

OFF