- ページ 4

バッテリーチャージャー Balmar CFII-12/24のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Balmar CFII-12/24 8 ページ。 Dual alternator charge balancer
Balmar CFII-12/24 にも：設置および操作マニュアル (6 ページ)

ページを印刷する

PORT REGULATOR DASH LAMP TERMINAL- Connect Terminal #6 to the port voltage regulator's dash lamp terminal

via a user supplied 16-gauge wire. Female 1/4" spade terminals are supplied for connecting to Terminal #6.

PORT DASH LAMP TERMINAL- Connect Terminal #7 to the port dash lamp via a user supplied 16-gauge wire. Female

1/4" spade terminals are supplied for connection to Terminal #7.

PORT "DASH LAMP" LED (RED) - Indicates activation of port voltage regulator's Dash Lamp terminal. Activation of the

Dash Lamp may occur as a result of high or low voltage, high alternator or high battery temperature. If LED is illuminated, inspect

the starboard voltage regulator long display for advisory codes.

GROUND TERMINAL - Connect Terminal #9 to system ground via 14-gauge BLACK wire. A female 1/4" spade terminal

is supplied for connection to Terminal #9. Termination to system ground will require a user-supplied spade or ring terminal

connector, depending on the ground location chosen. ALL GROUND CONNECTIONS MUST BE COMMON.

10.

STARBOARD "DASH LAMP" LED (GREEN)- Indicates activation of starboard voltage regulator's Dash Lamp terminal.

Activation of the Dash Lamp may occur as a result of high or low voltage, high alternator or high battery temperature. If LED is

illuminated, inspect the starboard voltage regulator long display for advisory codes.

11.

STARBOARD REGULATOR DASH LAMP TERMINAL- Connect Terminal #11 to the starboard voltage regulator's dash

lamp terminal via a user supplied 16-gauge wire. Female 1/4" spade terminals are supplied for connection to Terminal #11.

12.

STARBOARD DASH LAMP TERMINAL- Connect Terminal #12 to the starboard dash lamp via a user supplied

16-gauge wire. Female 1/4" spade terminals are supplied for connection to Terminal #12, and for connection to the starboard

regulator's dash lamp.

13.

COMMUNICATION PORT- Factory use only.

14.

COMMUNICATION PORT- Factory use only.

15.

COMMUNICATION PORT- Factory use only.

16.

STARBOARD IGNITION INPUT- Connect Terminal #16 to the starboard ignition switch or starboard engine oil pressure

switch. Terminal #16 must see zero volts when the starboard engine is turned off, and battery voltage when the starboard engine

is running. BROWN 14-Gauge user-supplied wire is recommended. A female 1/4" spade terminal is supplied for connection to

Terminal #16.

17.

STARBOARD REGULATOR IGNITION- Connect Terminal #17 to the starboard voltage regulator's BROWN ignition

wire. A BROWN ignition wire. A BROWN 14-Gauge user-supplied wire is recommended. A female 1/4" spade terminal is

supplied for connection to Terminal #17.

18.

STARBOARD "IGNITION ACTIVATED" LED (GREEN)- Indicates activation of starboard voltage regulator's ignition

wire. If LED is illuminated, but the starboard voltage regulator is inactive, check for voltage at the regulator's ignition terminal.

19.

STARBOARD ALTERNATOR FIELD OUTPUT TERMINAL (MASTER)- Connect Terminal #19 to the starboard

alternator's field input terminal via a user supplied 12-Gauge BLUE wire. A female 1/4" spade terminal is supplied for connection

to Terminal #19. Alternator-side termination will require a user-supplied spade or ring terminal connector, depending on the

alternator configuration.

20.

STARBOARD REGULATOR FIELD INPUT TERMINAL (MASTER)- Connect Terminal #20 to starboard voltage

regulator's Field Output terminal via a user-supplied 12-Gauge BLUE wire. A female 1/4" spade terminal is supplied for

connection to Terminal #20. The 12-Gauge BLUE wire will replace the regulator's 14-Gauge field wire.

"COMBINE" LED (AMBER)- Indicates activation of port and starboard alternators and voltage regulators. The CFII

21.

-12/24 will continue to supply balanced field current to both port and starboard alternators when the LED is activated.

www.balmar.net / Customer Service: +1 (360) 435-6100 x1 / Technical Support: +1 (360) 435-6100 x3

Tech Service is available Monday - Friday (8:30am - 7:30pm EST)