- ページ 11
室内装飾品 Balt 90124のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Balt 90124 15 ページ。 Single floor carrel
ページを印刷する
5.
Place the Middle Side Panel (P-1) with the Camlocks(C)
facing up and install 2 each Cam Posts (D) in the 2
threaded insert nuts (Pre-installed) as shown
in illustration # 3.
6.
Install 2 each Long Dowels (E) into the holes as shown in illustration # 3.
7.
Attach Middle Side Panel (P-1) to Middle Leg (P-5 ) as shown in illustration
# 3. Secure by turning the Cam Locks (C) 1/4 turn until they lock.
Attach Left Keyboard Slide (P-6) to the Middle Side Panel (P-1) using 2
8.
each Screws (A1) as shown in illustration #3.
9.
Attach 1 Glide Bracket (F) using 1 Socket Screws (A) and 1 Interior
Threaded Posts (B) as shown in illustration #3. Tighten Screws using
Phillips Screwdriver.
Insert 1 Glide (G) into the Glide Bracket (F) as shown in illustration #3.
10.
C
D
P-6
E
A1
To Secure Cam Locks, Insert
Large Phillips Head Screwdriver
and turn Cam Lock 1/4 turn (90
degrees) clockwise.
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
D
P-1
Note: (B) screw
is in 1st HOLE
A
B
4
P-1
Centerline of
Edge Drilled
hole.
F
G
Illustration # 3
Phillips
Screwdriver
Arrow
P-5